VoIP board
- VoIP board missing
- VoIP board inserted
- VoIP board ERROR
- VoIP board OK
- Too many busy VoIP channels
- Number of busy VoIP channels decreased under maximum level
- Too low number of busy VoIP channels
- Number of busy VoIP channels increased over minimum level
- VoIP SIP line is not registered
- VoIP SIP line is registered
PRI board
- PRI board missing
- PRI board inserted
- PRI board ERROR
- PRI board status: OK
- PRI 1 link unplugged, layer1 deactivated
- PRI 1 link plugged in, layer1 activated
- PRI 1 link layer 2 not established
- PRI 1 link layer 2 established
- PRI 2 link unplugged, layer1 deactivated
- PRI 2 link plugged in, layer1 activated
- PRI 2 link layer 2 not established
- PRI 2 link layer 2 established
- Too many number of busy B-channels on PRI 1 link
- Number of busy B-channels on PRI 1 link decreased under maximum level
- Too low number of busy B-channels on PRI 1 link
- Number of busy B-channels on PRI 1 link increased over minimum level
- Too many number of busy B-channels on PRI 2 link
- Number of busy B-channels on PRI 2 link decreased under maximum level
- Too low number of busy B-channels on PRI 2 link
- Number of busy B-channels on PRI 2 link increased over minimum level
GSM slots
- GSM board in slot missing
- GSM board in slot inserted
- GSM board ERROR
- GSM board in slot, status: OK
- First GSM module on GSM board: ERROR
- First GSM module on GSM board: OK
- First GSM module on GSM board has too strong signal level
- First GSM module on GSM board decreased under level of too strong signal level
- First GSM module on GSM board has weak signal level
- First GSM module on GSM board increased over level of too weak signal level
- Second GSM module on GSM board: ERROR
- Second GSM module on GSM board: OK
- Second GSM module on GSM board has too strong signal level
- Second GSM module on GSM board decreased under level of too strong signal level
- Second GSM module on GSM board has weak signal level
- Second GSM module on GSM board increased over level of too weak signal level
Power supply
- Power supply fail
- Power supply ok
SMS buffer
- Number of SMS/SMPP messages in memory exceeds defined max level
- Number of SMS/SMPP messages in memory decreased under defined max level
- Number of SMS/SMPP messages in memory exceeds defined max level
- Number of SMS/SMPP messages in memory decreased under defined max level
