Rack
- Dimensions (W x H x D): 160 x 185 x 320 mm (29HP x 3U x 320 mm)
- Weight (full configuration): 4.1 kg
- Power supply: 100–240V AC / 50–60Hz
- Power input: up to 50VA
GSM / UMTS
- Mobile network type: GSM phase II or UMTS
- Transmission output per channel: 900MHz / 2W, 1800MHz / 1W or 850MHz / 2W, 1900MHz / 1W or 850MHz / 900MHz / 1700MHz / 1900MHz / 2100MHz UMTS
- SIM cards: Plug-in small 3V
- VF connector: GSM and UMTS boards with Cinterion MC55i-w, Telit GE910, Telit HE910-EUR, Telit HE910-NAR with module connector – SMA 50ohm
- Antenna splitter: Only external
PRI Interface(s)
- Interface: 1PRI or 2ISDN PRI
- Frame: E1
- CRC: Supported
- Signalling: Q.931-EDSS1
- Type (NT or TE): Switchable NT or TE
- TEI number: 0–63
- Clock (master or slave): Master/Slave
- Connector RJ 45, Rxpin, Txpin: Switchable RJ45 (Rx-1,2 Tx-4,5 / Rx-4,5 Tx-1,2)
- D channel timeslot: 16
VoIP Interface
- Interface: Switch 4x 10/100BaseT FullDuplex
- Signalling: SIP
- Voice compression:
- G.723.1; MP-MLQ at 6.3, ACELP at 5.3 kbps
- G.729 Annex A, B; CS-ACELP at 8kbps
- G.711; PCM at 64kbps (u-Law/A-Law)
- Number of voice channels: 30
- Connector type: 4 RJ45 (Ethernet switch)
- Adaptive Jitter Buffer
- Jitter buffer size: 200 ms
- The jitter fixed delay: 60 ms
Temperature
- Working temperature range: 0°C to + 50°C
- Relative humidity: up to 95% at 40°C
- Air-condition: Recommended
Remote Control Line Types
- Type of line:
- Serial line (COM1)
- Ethernet 100baseT – Telnet
- ISDN PRI (PRI 1, PRI 2)
- Web interface – HTTP
