Anynode

Content

About

Anynode is a total software based Session Border Controller that enables multiple SIP-Endpoints to communicate with one another seamlessly.

https://www.anynode.de/

Version 4

Tested with

anynode version	2N IP Intercom	Registrations	Calls	Secure RTP (SRTP)
4.0.18	2.31

License

Enhanced Security (Part No. 9137908, Axis Part No. 01379-001)

Settings

Anynode Settings

To add 2N IP Intercom to Anynode PBX activate the Configuration Mode in the web GUI of your Anynode server and run Wizard. Then chose Create a node as registrar for SIP option and click Start.

You can also find some video tutorials of Anynode on the Youtube platform: https://youtu.be/8dsOVqfvTCM

Click on Configure... button to set everything up.

If your Anynode server doesn't have a Network Controller set yet, it must be done now. Enter the Name and exact Network Interface name according to your OS. Than you can setup IP addresses and clik Next.

Configure Ports to be used for registrar. Usualy they are 5060 for UDP/TCP connection, or 5061 for TLS.

Than configure directory of phone devices connected to PBX, including the account for 2N IP Intercom. Enter a Name, SIP authentication data, Dial string for Registrar or other custom settings if you need. Repeat that same for all telephone devices and click Finish.

Continue with configuration of Network Peer Whitelist and Minipulations according to screenshots, or if you need another settings, configure it according to your needs.

Enter a name of SIP Phones Node and click Finish two times.

Audio and Video configuration

To configure Audio codecs stay in Configuration Mode and enter to the menu: Configuration / Nodes / SIP Phones chose Media Negotiation and in the Settings menu set necessary codecs according to the image.

Video is only supported by Passthrough Mode. So please enter the menu: Configuration / Routing Forward Profiles / To SIP Phones and chose Media Negotiation Forwarder. In the Setting section and continue according to the picture.

2N IP Intercom Settings

Login to your 2N IP Intercom web GUI by your password, if you set it already, or with the default credentilas "admin" and password "2n". If you use the tefault credentials, you will be asked to chenge the password.

Open the menu Services / Phone / SIP 1. Then enter credentilas according to configuration of your Anynode server here.

Secure RTP(SRTP)

SRTP on Anynode PBX

No special settings are required to be made in Anynode PBX System.

SRTP on 2N IP Intercom

Go to SIP settings in Services and in Advanced settings enable recieving and transmitting of SRTP calls.

Used Symbols

- Verified with video

- Verified with audio only

- Work with limitation

- Incompatible