Stránka 318 z 1,179. Nalezeno 11,781 výsledků (0.099 vteřin)
.3.3.3 Instalace baterie v1.10
battery parameters are not part of the system configuration and thus are not changed during the factory default reset.SMS - Jak nastavit 2N® Lift8 pomocí SMS zpráv
=00420222222222 012=00420111111111 (You can use any available parameter from parameter chart) Put 2N® Lift8 into the factory default: L8 DEF 12345 Restart: L8 RST 12345 Possible responses Confirmation messages L8 CNF OK - configuration was applied L8 DEF OK - reset to factory default was successful L8 SET OK - switch.5.4.1 Řízení přístupu v2.40
be retrieved via an HTTP request sent to api/lpr/image available in 2N® Access Commander. The software factory reset or different configuration upload does not result in a change of the access blocking setting. It is only the hardware factory reset using the Reset button on the device that resets the default values.5.4.1 Řízení přístupu v2.41
be retrieved via an HTTP request sent to api/lpr/image available in 2N® Access Commander. The software factory reset or different configuration upload does not result in a change of the access blocking setting. It is only the hardware factory reset using the Reset button on the device that resets the default.5.4.1 Řízení přístupu v2.42
in 2N® Access Commander. The software factory reset or different configuration upload does not result in a change of the access blocking setting. It is only the hardware factory reset using the Reset button on the device that resets the default values. The Security Relay enhances the installation security against.5.4.1 Řízení přístupu v2.48
in 2N Access Commander. The software factory reset or different configuration upload does not result in a change of the access blocking setting. It is only the hardware factory reset using the Reset button on the device that resets the default values. The Security Relay enhances the installation security against.5.4.2 Řízení přístupu v2.42
to api/lpr/image available in 2N® Access Commander. The software factory reset or different configuration upload does not result in a change of the access blocking setting. It is only the hardware factory reset using the Reset button on the device that resets the default values. The Security Relay enhances the2N_IP_Uni_Instalacni_manual_CZ_2.9.pdf
TAMPER – Tamper POWER – Vstup napájení RESET – Tlačítko RESET 2N TELEKOMUNIKACE a.s., www.2n.cz 28/52 Připojení do lokální sítě 2N Helios IP Uni® se připojuje … 2N Helios IP Uni® je vybaven tlačítkem RESET. Podržením tlačítka po dobu delší než 10 s se obnoví originální tovární nastavení zařízení. Veškerá data2N_IP_Uni_Instalacni_manual_CZ_2.10.pdf
na svorkách označených TAMPER. 2N TELEKOMUNIKACE a.s., www.2n.cz 31/53 Uvedení zařízení do výchozího stavu 2N Helios IP Uni® je vybaven tlačítkem RESET. Podržením … v . Ujistěte se, Konfiguračním manuálu že alespoň jedna LED svítí nebo bliká. Zmáčkněte a držte tlačítko Reset 5 sekund na , 2N Helios IP Bezpečnostní relé2N_IP_Uni_Instalacni_manual_CZ_2.10.pdf
na svorkách označených TAMPER. 2N TELEKOMUNIKACE a.s., www.2n.cz 31/53 Uvedení zařízení do výchozího stavu 2N Helios IP Uni® je vybaven tlačítkem RESET. Podržením … v . Ujistěte se, Konfiguračním manuálu že alespoň jedna LED svítí nebo bliká. Zmáčkněte a držte tlačítko Reset 5 sekund na , 2N Helios IP Bezpečnostní relé