Hledat

Help

Stránka 400 z 1,179. Nalezeno 11,781 výsledků (0.14 vteřin)

  1. Direct call / Přímé volání - Jak nastavit 2N IP Interkom bez IP PBX

    2N IP Intercom umí provádět přímé IP-volání, tedy není potřeba PBX (proxy-server). Chcete-li uskutečnit přímé IP-volání na určitou stanici (v místní síti), musíte znát její IP adresu Abyste mohli volat na 2N IP Intercom, musíte znát jeho IP adresu Jak nastavit přímý IP (=SIP) -hovor: Ve webovém rozhraní interkomu
    FAQ_Intercoms_private • Čvc 12, 2023

  2. .6.2 Použití v2.8.7

    and voice menu. While upgrading, you can reset the Central Unit to the factory values using a checkbox. Having pressed Upgrade, wait for the firmware and voice
    Uživatelský manuál 2N Lift8 • Dub 29, 2025

  3. .9.2 Použití v2.6.0

    , you can reset the Central Unit to the factory values using a checkbox. Having pressed Upgrade, wait for the firmware and voice menu to be upgraded. Then
    Uživatelský manuál 2N Lift8 • Srp 01, 2019

  4. .5.2 Použití v2.6.0

    can reset the Central Unit to the factory values using a checkbox. Having pressed Upgrade, wait for the firmware and voice menu to be upgraded. Then a message
    2N® Call Center • Čvc 29, 2021

  5. .7.2 Použití v2.9.2

    to select the required firmware and voice menu. While upgrading, you can reset the Central Unit to the factory values using a checkbox. Having pressed Upgrade, wait
    Uživatelský manuál 2N Lift8 • Dub 10, 2025

  6. .6.1 Dokumentace API v2.3

    2N­ Access Commander • Zář 08, 2022

  7. .6.1 Dokumentace API v1.14

    Device and performs factory reset of removed device", "parameters": [ { "in": "path", "name": "deviceId … `serveraddress` is IP address of AC, \n\n`endpoint` - see section Paths.\n\n## HTTP\n\nHttp commands used for communication with the server:\n\n`GET` lists
    2N­ Access Commander • Lis 13, 2021

  8. .6.1 Dokumentace API v1.13

    Device and performs factory reset of removed device", "parameters": [ { "in": "path", "name": "deviceId … `serveraddress` is IP address of AC, \n\n`endpoint` - see section Paths.\n\n## HTTP\n\nHttp commands used for communication with the server:\n\n`GET` lists
    2N­ Access Commander • Lis 13, 2021

  9. .6.1 Dokumentace API v1.12

    Device and performs factory reset of removed device", "parameters": [ { "in": "path", "name": "deviceId … `serveraddress` is IP address of AC, \n\n`endpoint` - see section Paths.\n\n## HTTP\n\nHttp commands used for communication with the server:\n\n`GET` lists
    2N­ Access Commander • Lis 13, 2021

  10. .6.1 Dokumentace API v1.16

    ", "adminRight" ], "description": "Deletes the Device and performs factory reset of removed device", "parameters … `serveraddress` is IP address of AC, \n\n`endpoint` - see section Paths.\n\n## HTTP\n\nHttp commands used for communication with the server:\n\n`GET` lists
    2N­ Access Commander • Lis 13, 2021