AXIS A8105-E – Peer-to-peer call to 2N® Indoor Touch

2N® Indoor Touch is able to receive calls from the AXIS door station A8105-E. However there are some limitations.

Limitations

  • It is not possible to make a call from the 2N® Indoor Touch towards the AXIS Door Stations.
  • No video preview during the incoming call.
  • 2N® Indoor Touch with firmware version 3.5.1 and later.
  • Tested with AXIS A8105-E with firmware version 1.65.3.2.
  • IP address of AXIS A8105-E: 10.0.14.50. IP address of 2N® Indoor Touch: 10.0.14.55. This is only an example, please change it according to your network requirements.

Configuration of 2N® Indoor Touch

  • Go to onscreen menu - 2N IP Mobile - Settings and disable SIP port randomisation feature


Configuration of AXIS A8105-E

  • Go to web management - VoIP - SIP Settings and enable SIP.
  • Go to web management - Events - Recipients and add 2N® Indoor Touch´s SIP address as a new recipient.
  • Go to web management - Events - Action Rules and create a new Action Rule to call 2N® Indoor Touch by the call button.

  • Go to web management - VoIP - DTMF Settings and add DTMF Sequence for unlocking the door by 2N® Indoor Touch.

  • Go to web management - Events - Action Rules and create a new Action Rule to open the door when DTMF sequence is received during call.