Connection of 2 devices to one lock
Connection of two 2N devices to one lock using potential outputs
To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.
To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.
Connection of two 2N devices to one lock using non-potential relays
For the lock connection, we highly recommend using the output with installed 2N® Security Relay (Part No. 9159010) for enhanced installation security.
For the lock connection, we highly recommend using the output with installed 2N® Security Relay (Part No. 9159010) for enhanced installation security.
Connection of one 2N device and 3rd party controller using potential outputs
To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.
To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock.
Date of release: 27. 5. 2021
Used devices in manual:
- 2N IP Verso (firmware version 2.32)
- 2N Access Unit 2.0 (firmware version 2.32)
List of compatible Hardware:
- 2N IP Verso
- 2N IP Vario
- 2N IP Force
- 2N IP Safety
- 2N IP Base
- 2N IP Solo
- 2N Access Unit 1.0 & 2.0
- 2N Access Unit M