IP setting - How to find out the IP address?

The default IP is and DHCP client is off. There are two ways how to find the modified IP.

You can use the 2N software IP Scanner in the network with your 2N® VoiceBlue Next and scan the network. You can download this software from our web page www.2n.cz. IP Scanner searches the network with higher priority in your computer. If you are connected to more networks with your computer, stay connected just to the network where the 2N® VoiceBlue Next  is located.

In case you cannot find 2N® VoiceBlue Next with IP Scanner then the gateway is probably situated in different network than your computer. In such case please use the Wireshark software. Start the capture on network interface with VoiceBlue Next and filter ARP packets. You can wait for the packet but it is usually quicker to disconnect and connect Ethernet cable on 2N® VoiceBlue Next side or switch side. The packet Source MAC address is marked with our ID 2nTeleko.