Settings of 2N® OfficeRoute as a GW for Siemens OpenScape PBX

  • By default there is DHCP server enabled. Connect your PC to the OfficeRoute, open standard web browser and enter the IP address 192.168.1.1. The configuration wizard will appear.
  • Go through  configuration wizard and apply each step by icon at the right bottom corner.

  • Go through the steps and fill all necessary parameters¨
  • Create one Extension

  • Enter the password for the Extension – the password is compulsory for the extensions.

  • Do not fill in any fields for VoIP provider

  • Make routing for incoming calls.

  • Outgoing calls has to be dialed with prefix for outbound calls „0“. It is possible to change this settings.