- Connect your PC with MikroTik over Ethernet cable to Ethernet port 2-5
![](/faqtel/files/en/104860230/104860233/1/1684486447332/image2023-5-19_11-54-7.png)
- Setup IP address on your Network adapter as described in the picture
![](/faqtel/files/en/104860230/104860234/1/1684486460140/image2023-5-19_11-54-20.png)
- Open your web browser and type 10.10.10.1 to connect to the MikroTik Configuration web interface
![](/faqtel/files/en/104860230/104860236/1/1684486490752/image2023-5-19_11-54-51.png)
- Disable or remove DHCP client
![](/faqtel/files/en/104860230/104860237/1/1684486511246/image2023-5-19_11-55-11.png)
- Setup static IP address on Ethernet port 1
![](/faqtel/files/en/104860230/104860238/1/1684486522678/image2023-5-19_11-55-22.png)
- Add Default Gateway. Go to IP -> Routes -> Add New and setup like on following picture
![](/faqtel/files/en/104860230/104860239/1/1684486535109/image2023-5-19_11-55-35.png)
- Add IP addresses of DNS servers. Go to IP -> DNS -> Settings and setup all DNS servers
![](/faqtel/files/en/104860230/104860240/1/1684486547240/image2023-5-19_11-55-47.png)