Content
About
Version 1.0.7
How to convert a video for 2N IP Intercom display:
How to upload a video to 2N IP intercom:
Used Symbols
About
HandBrake is a tool for converting video from nearly any format to a selection of modern, widely supported codecs.
Program Website: https://handbrake.fr/
Version 1.0.7
| |
|---|
2N IP Intercom 2.21.0.30.3 |  |
How to convert a video for 2N IP Intercom display:
Maximize video size 2MB
Maximum Resolution 214x214 px
H.264 compression in MP4 file
H.264 Profile: Constrained Baseline Profile
H.264 Level: maximum 5.2
We will choose a video which we would like to convert.
We will start in "Picture" folder and set "Container" to "MP4". After that we set "Anamorphic" to "None" and we will prohibit "Keep Aspect Ratio". Last thing to set in this folder is resolution "Height" and "Width" to "214x214".
In folder "Video" we set "Video Codec" to "H.264(x264)" and "Framerate (FPS)" to "15". Now is important to allow "Fast decode" and set "Encoder profile" to "Baseline". Value of "Encoder level" must be lower than "5.2".
In the next step we go to "Audio". If video have some audio you can delete it, because interkom do not play it. Audio you can delete if you click on the red cross. We recommended delete audio, because it can reduce a size of video.
Now we will go to "Subtitles" folder. Situation in this folder is similar like in last step. If the video has got subtitles you can delete them by click on red cross.
In "Chapter" folder you must prohibit "Creating chapter markers". In field "File" you determinate, where you would like to save video. After that you can click on "Start encode". Converting video is now started.
You can verify on the top bar whether converting of video has been started. When the converting of video will be done, you can find him in selected folder.
How to upload a video to 2N® IP Verso intercom:
Go to the section "Hardware→ Display→ Slideshow" and clik on the plus button. Choose a video, which you created in previous steps. When will be video loaded, you will see him next to plus button. Now you can clik to "Save". It is possible to upload more than one video.
Now we go to section "Hardware→ Display" and set "Slideshow Screen Activation Timeout". This parameter define time after which will be video played.
Used Symbols
- Compatible
- Work with limitation
- Incompatible
