Geco WAM2
Content
About
The company GeCOSoft mbH located in Neu Ulm, Germany offers solutions for data processing, access control and planning.
Version
Geco WAM2 8.1.2 | |
|---|---|
2N IP Intercom 2.26.0.35.6 |  |
Caution
- 2N Enhanced Integration or Gold License is required.
How to connect wires
2N IP Intercom / 2N Access Unit and Geco WAM2 are interconnected via network. The door is connected to the WAM2 relay board. When RFID tag is read at 2N IP Intercom / 2N Access Unit, HTTP command is send to the WAM2, which activates the relay to open the door.
 |
2N IP Intercom Settings
Go to Services – Automation and edit the function. Prepare Automation according to the following picture
 |
- Format: http://{4}:8080/gecoctrl/N2?App={1}&LeserAdr={2}&AuswNr={3}
- Param 1: 0
- Param 2: 0
- Param 3: Connected to the link Card from the block Card Entered (Card ID is transferred via this link)
- Param 4: 10.27.7.14 (Geco WAM2 IP address)
Geco WAM2 Settings
Cards are stored in the menu Zutrittskontrolle / Ausweis Tabelle. Tested with the card ID: 3F00F318E7
Manual from Allnet: Handbuch 8 Kanal Access Controller Vers. 7_19.pdf
 |
Used Symbols
- Interoperable
- Work with limitation
- Incompatible