7. Technical Parameters

Power Supply

  • Type: external power adapter part no. 91378381E, 91378381GB, 91378381US (SELV type with LPS) 90–230 V, 50–60 Hz to 12 V DC 0,75 A  or Power over Ethernet (PoE 802.3af)

Power Consumption

  • In idle:
    • 12 V: 2,64 W – 0.22 A
    • PoE: 3,6 W
  • Max. in active state: 12 W / 1 A

User Interface

  • Control: capacitive touch panel
  • Display size: 7"
  • Resolution: 1024 x 600 px
  • Backlight: LED
  • Status indicator: 1 RGB LED

Audio

  • Microphone: integrated
  • Loudspeaker: 2 W integrated

OS

  • Android 6.0.1

Interface

  • LAN: 10/100BaseT, RJ-45; Cat5e or higher (recommended)
  • Memory card: microSD card (SDHC) up to 16GB
  • WiFi: 802.11b/g/n, integrated antenna (not available in Korea, Japan and Malaysia)

Wi-Fi Module 

  • Supported authentication methods:
    • WEP, WPA/WPA2 PSK and 802.1x EAP

Mechanical Parameters

  • Dimensions (w x h x d): 235 x 165 x 40 mm
  • Weight: 850 g
  • Operating temperature: 0°C – 60°C
  • Relative humidity: 10% – 90% (non-condensing)
  • Storing temperature: −20 °C – 70 °C
  • Recommended altitude: 0–2000 m

I/O Description

  • HW v4
SignificationNameRestriction
ANALOG IN 1/2Analog Input0–5 V DC 1.5 MΩ
OUTPUT 1/2Digital OutputVoh = 3.3 V DC 0.33 mA
INPUT 1/2Digital InputVihmax = 5 V DC 100 kΩ
IN (OUT) 1/2Digital Input/Output

Vihmax = 3.3 V DC (100 Ω
serial resistor), Voh = 3.3 V DC
4 mA (100 Ω serial resistor)

REL1/2Relay

contact data: max 30 V DC 1 A.
DC 12 V +/− IN = power input:
Vinmax = 12 V DC Imax = 1 A.
DC 12 V + OUT = power output:
Vout = 12 V DC Imax = 100 mA

DC12V+ OUT+12 V outputImax = 100 mA
DC12V+ IN+12 V inputImin = 1000 mA
GNDGround (−12 V input)