2.1 Product Description

2N^® Lift1 is a Speakerphone on principle. It is equipped with a microphone, speaker, phone line terminals, ALARM button, illuminated pictograms (according to standard requirements) and CANCEL input (optional cabin door opening signal).

2N^® Lift1 is available in two versions. The Universal version is designed for mounting behind the pre-drilled (according to the drawing, see the Mounting section) lift panel. The Compact version is provided with a metal case and can be installed quickly and easily without advance preparation.

Operation

Press the ALARM button to activate the device. The "Wait" pictogram starts shining immediately. The "Connection established" pictogram starts shining when communication has been established.

Universal Design

The electronics board is located between the mounting panel and the cover printed with instructions (see the figure). The total dimensions are 65 x 130 x 24 mm. The speaker and microphone are mounted on the panel. There are basic (slide-on) terminals to the left and extending modules (lift blocking, switches) to the right.

The small connectors in the lower part are intended for induction loops (for hearing impaired persons) and LED indicators. Illuminated pictograms/icons (even with bulbs) can be easily connected to the device. The pictograms and the ALARM button are not included in the delivery as they are lift design elements.

Compact Version

2N^® Lift1 Compact is a robust, metal-encased audio unit equipped with an ALARM button of the prescribed size by default. In buttonless versions, an external button is connected as necessary. The audio unit is equipped with illuminated pictograms to signal the connection state and an induction loop for deaf people. It can easily be wall mounted without requiring precise wall cut-outs. It combines all the required lift communicator functions in the basic version. A PSTN or alternative (PBX, GSM gateway) line is used for connection with the control centre.

 Press the ALARM button to activate connection. The "Wait" pictogram goes on immediately and the "Connection established" symbol goes out when communication has been set up. You can use automatic dialling of up to six pre-programmed numbers. Communication is accompanied by factory announcements and/or user recorded lift ID messages.