4.3.3 Alarm Call

You can store up to 4 phone numbers for alarm calls and the repetition period.  2N LiftIP 2.0 makes successive calls to the stored numbers, the repetition period is terminated automatically after a call is confirmed. 

 Once the  alarm (emergency) call is connected, the device switches into the rescue mode. 

Alarm Call

• Press Time to Activate – set the minimum pressing time for the ALARM1 button to initiate an alarm call.
• Delayed Call – set that the alarm call shall be delayed (the call establishing sound message is played in the cabin during the delay).
• Call Delay – set the alarm call delay (the call establishing sound message is played in the cabin during the delay). Do not set this parameter to a value lower than the Test Alarm's parameter Press Time to Activate.

• Enable– make it possible to initiate a test alarm call by a mere long press of the ALARM1 button.
• Press Time to Activate – set the pressing time for the ALARM1 button to initiate a test alarm call. Do not set this parameter to higher value than the parameter Call Delay.

• 1–4 – select the user to which the connection will be directed.
• Repetition Count – set the count of calling cycles if a call is not confirmed.

• Test ALARM Call – display a dialog box to carry out an alarm call test to the destinations as defined. The whole cycle repeats as set until a call is confirmed.

Alarm Call 2

• 1 – select the user to which the connection will be directed.
• Repetition Count – set the count of calling cycles if a call is not confirmed.

• Test ALARM2 Call – display a dialog box to carry out an alarm call test to the destinations as defined. The whole cycle repeats as set until a call is confirmed.