4.5.3 External Camera

2N^® LiftIP 2.0 enables video to be transmitted during an alarm call from an external camera located in the lift cabin. 

List of Parameters

• Camera Enabled – enable RTSP stream download from an external IP camera. Complete the valid RTSP stream address or the username and password to make the function work properly.
• RTSP Stream Address – enter the IP camera RTSP stream address:rtsp://camera_ip_address/parameters . The parameters are specific for the selected IP camera model. If you use another 2N IP device as an external camera, use the following address: rtsp://ip_address/mjpeg_stream.
• Username – enter the username for the external IP camera connection authentication. The parameter is mandatory only if the external IP camera requires authentication.
• Password – enter the external IP camera connection authentication password. The parameter is mandatory only if the external IP camera requires authentication.
• Local RTP Port – local RTP port. Change the value according to your network configuration if necessary.

The External IP Camera Log displays the RTSP communication with the selected external IP camera including failures and error states if any.