2.2 Before Installation

Packing List

Please check whether the contents of the package of your new 2N® OfficeRoute complies with the following list.

  • 1 2N® OfficeRoute – check the part number, see the type label on the gateway back side
  • 1 12V/2.5 A mains adapter
  • 1 USB cable
  • 1 ETHERNET cable
  • 1 Antenna
  • 1 Wall mounting holder
  • 2 Dowels
  • 2 Screws
  • Quick user guide
  • Compliance certificate
  • 2N product CD
  • Warranty certificate 

Brief Installation Guide

  • Proper mounting – 2N® OfficeRoute is designed for suspension on a vertical surface. Fit the holder included in the delivery on a wall and hang the gateway on it. For details on the prescribed working position and other recommendations refer to Section 2.4.
  • Cable connection – connect the gateway using a patch-cable to the LAN (Local Area Network).
  • Antenna connection – connect an internal antenna or an external antenna cable to the SMA antenna connector. Install the external antenna on a place with a good UMTS/GSM signal.
  • Gateway power supply – the delivery includes a mains adapter. Plug in the adapter connector into the gateway and the power adapter into a mains socket (≈230V/50Hz). The gateway turns on immediately.
  • SIM card insertion – insert the SIM cards in the holders on the gateway top.
  • PC connection and initial configuration – a web browser is used for gateway configuration in normal operation.  If you have not defined the IP address for the gateway, use the USB cable included in the delivery for initial configuration of the basic parameters or reach 2N® OfficeRoute on its default IP address 192.168.1.1.
  • Setting and monitoring – having set the basic network parameters (IP address, etc.), you can configure 2N® OfficeRoute using a standard web browser (http or https). Configuration options and essential procedures shall be discussed in detail in the respective sections.