Porovnat verze

Stará verze 71

changes.mady.by.user Ondřej Šindelář

Uloženo na

v porovnání s

Nová verze 72

changes.mady.by.user Ondřej Šindelář

Uloženo na

Klíč

  • Tento řádek byl přidán.
  • Tento řádek byl odstraněn.
  • Formátování bylo změněno.

...

2N® Access Commander version 3.1.1 includes support for Intercom and Access Unit firmware 2.44 and a few minor bug fixes in addition to the features introduced by 3.1 listed below.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 3.1 (production April 2024)

2N® Access Commander version 3.1 introduces a more secure method of login (2FA), Dutch Language and other improvement

...

2N® Access Commander version 3.1 (production April 2024)

2N® Access Commander version 3.1 introduces a more secure method of login (2FA), Dutch Language and other improvement


**IMPORTANT** Due to security reasons this version of Access Commander is not compatible with 2N Intercoms and 2N Access Units running FW 2.37 or older. Access Commander will not manage devices with these FW even with enabled compatibility mode. Please ensure that all devices are running FW 2.38 or newer before upgrading.

...

* [APIv2 Change log] No changes were made
* [APIv3 Change log] https://www.2n.com/documents/22902/2323545/Diffv3_v3.0-v3.1+2.md/c8a5ad20-6179-4902-b8a5-81a8f26d50d1

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 3.0.1 BugFix (Production April 2024)

...

  • 2N IP Intercoms from 2.38.x to 2.43.x

  • 2N Access Units from 2.38.x to 2.43.x

2N® Access Commander version 3.0 (production February 2024)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 3.0 (production February 2024)

2N® Access Commander version 3.0 introduces a brand new look and feel. While the look has changed, it's the same trusted Access Commander, now more user-friendly, simplified and intuitive.

Changelog 3.0

New interface

New improvements

Mobile friendly visitor enrolment

Russian language support has been removed from Access Commander 3.0

Access Commander 3.0 includes the ability to toggle back to the old interface. It's worth noting that starting from version 3.1, only the new interface will be available, and the old interface will no longer be supported.

Upgrade to PostgreSQL 15

Supported device firmware version:

* 2N IP intercoms from 2.2N® Access Commander version 3.0 introduces a brand new look and feel. While the look has changed, it's the same trusted Access Commander, now more user-friendly, simplified and intuitive.

Changelog 3.0

New interface

New improvements

Mobile friendly visitor enrolment

Russian language support has been removed from Access Commander 3.0

Access Commander 3.0 includes the ability to toggle back to the old interface. It's worth noting that starting from version 3.1, only the new interface will be available, and the old interface will no longer be supported.

Upgrade to PostgreSQL 15

Supported device firmware version:

* 2N IP intercoms from 2.38.x to 2.42.x
* 2N Access Unit from 2.38.x to 2.42.x
* 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

**IMPORTANT**

In May 2023 we announced that the old APIv2 will be retired in place of a more advanced APIv3 and gave a transition period of one year where the two versions run side by side. From Access Commander 3.1 (Q2 2024) APIv2 will be no longer supported, and will be removed completely from Access Commander 3.2 (Q3 2024). 
If you are using Access Commander with a third-party integration, please ensure that this integration is compatible with APIv3 soon to avoid loss of functionality in future versions.
For more information on Access Commander's API see the documentation in the online manual
* Russian language support has been removed from Access Commander 3.0

API changes

* [APIv2 Change log](https://www.2n.com/documents/22902/74426/APIv2+change+log+-+2N%C2%AE+Access+Commander+3.0.md/94202e31-ba91-4b16-9679-a4474581b2a9)
* [APIv3 Change log](https://www.2n.com/documents/22902/74426/APIv3+change+log+-+2N%C2%AE+Access+Commander+3.0.md/d3581281-c2e2-4115-a86a-c64d85d4210f)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.7.1 (production November 2023)

2N® Access Commander version 2.7.1 supports new version of firmware, that will be released.

Changelog 2.7.1

Supported device firmware version:

...

**IMPORTANT**

In May 2023 we announced that the old APIv2 will be retired in place of a more advanced APIv3 and gave a transition period of one year where the two versions run side by side. From Access Commander 3.1 (Q2 2024) APIv2 will be no longer supported, and will be removed completely from Access Commander 3.2 (Q3 2024). 
If you are using Access Commander with a third-party integration, please ensure that this integration is compatible with APIv3 soon to avoid loss of functionality in future versions.
For more information on Access Commander's API see the documentation in the online manual
* Russian language support has been removed from Access Commander 3.0

API changes

* [APIv2 Change log](https://www.2n.com/documents/22902/74426/APIv2+change+log+-+2N%C2%AE+Access+Commander+3.0.md/94202e31-ba91-4b16-9679-a4474581b2a9)
* [APIv3 Change log](https://www.2n.com/documents/22902/74426/APIv3+change+log+-+2N%C2%AE+Access+Commander+3.0.md/d3581281-c2e2-4115-a86a-c64d85d4210f)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.7.1 (production November 2023)

2N® Access Commander version 2.7.1 supports new version of firmware, that will be released.

Changelog 2.7.1

Supported device firmware version:

  • 2N IP Intercoms from 2.36.x to 2.42.x
  • 2N Access Unit from 2.36.x to 2.42.x

2N® Access Commander version 2.7 (beta August 2023, production August 2023)

...

  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.6.1 (June 2023)

...

  • 2N IP intercoms 2.35.x
  • 2N Access Unit 2.35.x
  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.5.1 (February 2023)

...

  • 2N IP intercoms 2.33.x
  • 2N Access Unit 2.33.x
  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.4.1 (October 2022)

...

  • 2N IP intercoms 2.34.x
  • 2N Access Unit 2.34.x
  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.3.1

Changelog 2.3.1

Please note that this version is a minor release, further to the release of version 2.3 in April. It focusses on corrections and introduces no new features.

...

  • System admin reverted to state where it does not consume any manager licenses
  • Attendance management authorizations will be removed from users where an installation without the attendance management license is updated to a new version.
  • Presence of a user is updated in presence list without need for page refresh
  • Corrected timestamps of attendance records when exported to CSV

2N® Access Commander version 2.3

Changelog 2.3 

2N® Access Commander version 2.3 introduces a new access matrix for quick setup and audit of access permissions, allows backup and restore to be managed from the web GUI and introduces new user authorization settings for increased flexibility.

...

  • 2N IP intercoms 2.33.x
  • 2N Access Unit 2.33.x
  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.2

Changelog 2.2

2N® Access Commander version 2.2 (Beta November 2021 - Production December 2021)

...

  • 2N IP intercoms 2.32.x
  • 2N Access Unit 2.32.x
  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.1

Changelog 2.1

2N® Access Commander version 2.1 (Beta August 2021 - Production September 2021)

...

  • 2N IP intercoms 2.31.x
  • 2N Access Unit 2.31.x
  • 2N Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2N® Access Commander version 2.0

Changelog 2.0

2N® Access Commander 2.0 is a major new release which brings great changes to the user interface, as well as powerful new features and improvements. Along with these changes, the license model of Access Commander has also been changed. All users with existing licenses will be migrated to the appropriate new license automatically and free of charge, ensuring you continue to benefit from the same functionality.

...

  • 2N IP intercoms 2.30.x
  • 2N Access Unit 2.30.x
  • 2N® Indoor Touch 2.0: 4.3.x (devices running versions prior to this will be disabled in Access Commander)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Changelog 1.17.0

## If Access Commander is updated before IP Intercom and Access Unit firmware 2.31.x is available then some newer functions may not be fully supported. Please note the minimum supported firmware in this version is 2.29.x. Please also note that the default 2N SMTP server will no longer be available in version 1.17.0. We suggest you ensure your own SMTP server settings are defined upon update, if you have not already done so, to ensure system and notification messages continue being sent##

...