| Informace | ||
|---|---|---|
| ||
If you are running 2N® Access Commander version 1.9.1 or older, proceed please to this section for further details. |
| Kotva | ||||
|---|---|---|---|---|
|
2N® Access Commander version 1.14.0 (December/2019)
New Features:
- Bulk firmware update
- Users may choose to deploy firmware updates en-masse to all connected 2N IP Intercoms, Access Units, Access Units 2.0, Indoor Talk and Indoor Compact
- Device page will feature three tabs: Overview, Firmware (brand new upgrade section) & Compatibility (moved from current location in Settings menu)
- In the firmware section, users may choose the latest firmware available on 2N servers or may manually upload a firmware version of their preference to be deployed to all similar device types
- Individual devices can be chosen to test out a new firmware version before it is deployed to other similar devices
- Individual devices may be excluded from the bulk update
- Beta testing available for new versions
- Users will now be able to select to join beta testing of both Access Commander software and of compatible device firmware before their official release.
- Re-introduction of global time profiles
- Users may add up to 20 Global time profiles to all devices for use by features such as automation or general switch control in each device.
Improvements:
- Console shows IP address before login where DHCP is available or where a static IP has already been set
- Virtual machine available disk space increased to 120GB by default
- Support of keypad blocking following 5 failed attempts at PIN entry. (Please note that 2N devices themselves must already have either the Enhanced Security or the Gold license installed)
- Over 20k users may now be included in the presence list
- Lowercase letters may be included in user card ID’s
- Improved error message information
- Added support for Samba 2.0
- Ability to chose which devices will be used to record attendance in ‘In/Out’ mode
Corrections:
- Improved application of zone settings to devices added to the zone
- Attendance record may be added manually where multiple time zones are used
- Attendance manager may not view other users
- Attendance bulk export to CSV now shows individual sessions per user per day
- User login now possible via LDAP credentials
- Device may be added via domain name
Required firmware versions for supported devices
- 2N IP intercoms 2.28.x
- 2N Access Unit 2.28.x
Minimum supported firmware versions (devices prior to these versions will not be synchronised with Access Commander)
- 2N IP intercoms 2.26.x
- 2N Access Unit 2.26.x
| Kotva | ||||
|---|---|---|---|---|
|
...