1.1 Product Description

2N^® SmartCom  PRO  and 2N^® SmartCom  PRO  ETH GPRS/UMTS/ETH communication unit is a new product developed and manufactured to provide the maximum utility value, quality and reliability. We hope you will be fully satisfied with the 2N^® SmartCom PRO for a long time. Use 2N^® SmartCom PRo in accordance herewith for the purposes it was designed and manufactured for. 

2N^® SmartCom PRO  is designed for Internet connection via the GPRS/UMTS/ETH network and data retransmission from peripherals connected via RS 232/485/M-Bus/MDB/WM-Bus/ZigBee via the IP protocol and GPRS/UMTS or Ethernet network to a data requesting server or device. Two relay outputs can be controlled and switched and parameters can be measured on two galvanically connected inputs.

Safety Precautions

Do not switch on 2N^® SmartCom PRO in the vicinity of medical apparatuses to avoid interference. The minimum distance of the antenna and pacemakers should be 0.5m at least.

Do not switch 2N^® SmartCom PRO aboard a plane.

Do not switch 2N^® SmartCom PRO near petrol stations, chemical facilities or sites where explosives are used.

Any mobile telephone use prohibition based on RF energy radiation applies to 2N^® SmartCom PRO too.

2N^® SmartCom PRO may disturb the function of TV sets, radio sets and PCs.

Warning! 2N^® SmartCom PRO contains components that can be swallowed by small children (SIM card, antenna, etc.).

Never exceed the voltage value specified on the adapter. Check the available voltage range before connecting 2N^® SmartCom PRO to a different power supply.

When 2N^® SmartCom PRO comes to the end of its operational life, dispose of it in accordance with applicable regulations.

2N^® SmartCom PRO is equipped with an external antenna connector. The antenna has to be located indoors for safety reasons.