1.1 Product Description

Basic Features

  • The primary purpose of 2N® SmartGate UMTS is to transmit voice between UMTS/GSM network and attached phone terminals. You can connect terminal with FXO interface (trunk line of PBX, phone set, answering machine etc.) to FXS interface on 2N® SmartGate UMTS (connector with phone icon) and terminal with FXS interface (extension line of PBX) to FXO interface on 2N® SmartGate UMTS (connector with crossed out phone icon).
  • You can establish data connections (UMTS, EDGE, GPRS, CSD) and send/receive SMS using 2N® SmartGate UMTS in combination with a PC and appropriate software.
  • You can send an SMS to a pre-programmed number using the SMS sending input.
  • Version of SmartGate UMTS with Battery backup allows the function in case of power failure.

Advantages of 2N® SmartGate UMTS use

  • Call cost cutting – the calls are routed to UMTS/GSM or analog network according to their number prefix. Route all UMTS/GSM calls from PBX to 2N® SmartGate UMTS to save a lot on PSTN – UMTS/GSM calls.
  • Easy installation – you can easy program 2N® SmartGateUMTS as you need with enclosed SW.
  • You get all you need in the delivery – your 2N® SmartGate UMTS delivery contains all you need to operate the system (the power supply adapter, telephone cables, PC serial cable, SMS input connector, CD-ROM with software).
  • Solution for sites without telephone lines – such as mountain chalets, exhibitions, conferences, etc.
  • DialThru technology – all your calls will be routed most cost-effective way.
  • ME – Mobility Extension – you newer miss an incoming call from analog network. Incoming call will ring on connected phone and on your mobile phone too.
  • CLIP - 2N® SmartGateUMTS is equipped with the FSK-based CLIP feature, so if a terminal capable of receiving the CLIP is used you know the caller's number.
  • SMS sending input – simply send an SMS to a pre-programmed number by closing the contact. Recommended for easy supervision, simple securing, etc.
  • Radiation hazard minimization – you are not exposed to a direct effect of the antenna RF electromagnetic field while telephoning as opposed to mobile telephones.

Safety Precautions

 Do not switch on 2N® SmartGate UMTS in the vicinity of medical apparatuses to avoid interference. The minimum distance of the antenna and pacemakers should be 0.5m. 

 Do not switch on 2N® SmartGate UMTS aboard of a plane. 

 Do not switch on 2N® SmartGate UMTS near petrol stations, chemical facilities or sites where explosives are used. 

 Any mobile telephone use prohibition based on RF energy radiation applies to 2N® SmartGate UMTS too. 

 2N® SmartGate UMTS may disturb the function of TV sets, radio sets and PCs. 

 Warning! 2N® SmartGate UMTS contains components that can be swallowed by small children (SIM card, antenna, etc.). 

 The voltage value mentioned on the adapter may not be exceeded. If you connect 2N® SmartGate UMTS to another power supply, make sure that the voltage value is in the acceptable range. 

 When your 2N® SmartGate UMTS comes to the end of its operational life, dispose of it in accordance with applicable regulations.