10.4.2 Programmable Buttons - Setting
Button Function Assignment
The system administrator or a 2N® NetStar Assistant user may program the 2N® StarPoint programmable buttons. To assign a function to a programmable button:
- Log in to the 2N® NetStar Assistant web interface.
- Select the Telephones menu in the upper toolbar.
- Select the 2N® StarPoint type in the menu.
- Click on the button to be programmed in the terminal figure to open the window as shown in the figure below.
- Select the required function in the Function menu. Complete the other active windows if necessary (station name, user name, number, etc.) and click on Change for confirmation.
- The button is now ready for use.
Tip
- Refer to 10.4.3 Programmable Buttons - Functions for details on the functions to be assigned.
 |
Tip
- The functions of some buttons are pre-defined by your system administrator. Typically, they include Back (Esc), Redial, Access to missed calls, Call holding (Flash), Call slots and HandsFree. Therefore, you do not have to assign these functions any more.
Button Tagnames
The 2N® NetStar Assistant system is equipped with the automatic button tagname creating function.
Procedure:
- Click on the Prepare for printing item on the main telephone setting screen.
- This creates and displays a complete template in the PDF format. The template consists of tagnames defined and displayed in the 2N® NetStar Assistant environment.
Tip
- Make sure that a suitable PDF file browser has been installed for template viewing and printing (e.g. AdobeReader).