4.1 Other Terminal Parameter Settings

There are limited parameter settings for other telephones to be connected to the 2N^® NetStar SW. Click on the Telephones menu and select the required station. The following menu gets displayed with one or two tags (depending on the telephone type).

Basic

This tab is displayed for all the other telephone types to be connected (IP). 

The menu contains the following parameters:

• Station active – mark a station as active or inactive. An inactive station is inaccessible for other users (all incoming calls are terminated), but can set up calls.
• Mobility Extension – enable station ringing if the call is routed to the station user. If this option is not checked off, the station is not alerted when the call is routed to its user but is alerted when the call is routed to the station itself.
• Enable CLIR – restrict the calling line identification. You can also use a service or a programmable button function of the key system phone to enable CLIR.
• Alarm clock – set the alarm service for a user station. Click on Set alarm clock to display a window to set the date, time and user station to be called at the set time by the 2N^® NetStar SW. If the first incoming call is not answered, two more calls will be made. Push Cancel alarm clock to deactivate the alarm.