5.7.2 Pulse Dialing

The Pulse Dialing folder helps you set the pulse dialing parameters.

• Delay between digits – set the time delay between the pulses. The default value is 100 ms.
• Minimum pulse width – set the time value for the minimum pulse width. The default value is 30 ms.
• Minimum pulse width – set the time value for the maximum pulse width. The default value is 60 ms.
• Minimum delay – set the time value for the minimum inter-pulse delay. The default value is 10 ms.
• Maximum delay – set the time value for the maximum inter-pulse delay. The default value is 80 ms.
• Time to reset dial – set the timeout value for dialing clearing. I.e. line clearing time that is considered on-hook and cancels the preceding dialing.