5.8.3 Battery Status Signaling

The Battery Status Signaling folder indicates any 2N® EasyGate IP battery error via 2N® Lift1, which reports the error to the technical operation center using an operational call.

  • Enable Service – enable / disable the service.
  • LIFT1 Password – change the LIFT1 pre-authorization password. The password can contain up to 19 digits. The password change will be automatically written into Lift1 password in SMS / LIFT1 and vice versa.

Caution

  • Make sure that at least one of the 081–086 parameters (operational call memory) is set and parameter 968 (2N® EasyGate IP battery reports) is enabled in 2N® Lift1 to make the service work properly.