2.1 Before You Start

Package Completeness Check

Please check the product delivery before starting installation: Contents:

1

2N® Indoor Compact

2External power and doorbell button terminals
1Certificate of ownership
12.5 mm hexagon key wrench
1Quick Start manual
1Display cleaning cloth

Front Layout

  1. Display
  2. Microphone
  3. MENU buttons
  4. Lock button
  5. Call end button
  6. Speaker
  7. Anchoring holes
  8. Call answering button 

Backside Connectors

  1. External induction loop output
  2. Reset button
  3. Doorbell button input
  4. 12 V / 1 A DC power supply input
  5. Ethernet

2N® Indoor Compact is designed for flush mounting (brick, plasterboard, wood). Use the flush mounting box (Part No. 91378800), which is not included in the package. Alternatively, the product can be mounted into a desk stand (Part No. 91378802), which is not included in the package. 

Caution

  • Before starting the mechanical installation on a selected place, make sure carefully that the preparations connected with it (drilling, wall cutting) cannot damage the electrical, gas, water and other existing wires and pipes.









Cut a circular hole in the wall of the diameter of 103 mm and depth of 50 mm before installation. It is assumed that all necessary cables of the maximum length of 25 cm will lead to the hole. Put the flush mounting box in the hole to make sure that the hole is deep enough. If the hole complies with the box size, wall in the box and level the box using a water level on the holding clips. When the mortar hardens, break off the clips and cap the box with the cover provided. Use anchoring elements to fix the device into plasterboard.

Downloads

Drilling template.pdf

Use a 2.5 mm hexagon key wrench (included in the 2N® Indoor Compact delivery) for fitting 2N® Indoor Compact into the flush mounting box.

Note

  • While flush mounting 2N® Indoor Compact respect the local standards concerning installation of electronic devices on flammable materials.