3.1 Factory Reset
If you forget the password or set the IP interface incorrectly, you can press the RESET button placed on back side of the gateway (next to power connector).
Doing this, you restore the factory default configuration values for all parameters, including the Ethernet interface parameters and access data. Refer to Subs. 2.2 for factory settings.
Caution
- Resetting the factory configuration values results in changes of the Ethernet settings and subsequent necessity to reconfigure the gateway.
Note
- To reset the factory values, press the Reset button until the LED indicators start flashing red.
Note
- Push the RESET button for a short time (0.5 s) to restart the GSM gateway.