3.1 Factory Reset
If you forget the password or set the IP interface incorrectly, you can press the RESET button to the right of the RJ45 Ethernet connector for a long time.
Doing this, you restore the factory default configuration values for all parameters, including the Ethernet interface parameters and access data. Refer to Subs. 2.2 for factory settings.
Caution
- Resetting the factory configuration values results in changes of the Ethernet settings and subsequent necessity to reconfigure the gateway.
 |
 |
Note
- To reset the factory values, press the Reset button until the LED indicators start flashing red.
Note
- Push the RESET button for a short time (0.5 s) to restart the GSM gateway.