 |
The 2N® Indoor View help you update firmware and configuration manually, or automatically from a storage on a TFTP/HTTP server selected by you according to predefined rules.
The TFTP and HTTP server addresses can be configured manually. The 2N® Indoor View support automatic identification of the local DHCP server address (Option 66).
My2N / TR069
Use this tab to enable and configure remote device management via the TR-069 protocol. TR-069 helps you reliably configure the device parameters, update and back up configuration and/or upgrade device firmware.
The TR-069 protocol is utilized by the My2N cloud service. Make sure that TR-069 is enabled and Active profile set to My2N to make the device work with My2N properly. Only then the device will be able to log in to My2N periodically for configuration.
This function helps you connect the device to your ACS (Auto Configuration Server). In this case, the connection to My2N will be disabled in the device.
 |
- My2N / TR069 Enabled – enable connection to My2N or another ACS server.
 |
- Active Profile – select one of the pre-defined profiles (ACS), or choose a setting of your own and configure the ACS connection manually.
- Next Synchronization in – display the time period in which the device shall contact a remote ACS.
- Connection Status – display the current ACS connection state or error state description if necessary.
- Communication Status Detail – server communication error code or HTTP status code.
- Connection test – test the TR069 connection according to the set profile, see the Active profile. The test result is displayed in the Connection status.
 |
- My2N ID – unique identifier of the company created via the My2N portal.
- My2N Security Code – device code for adding to My2N.