CAM Log

The CAM logs record snapshots of the preceding and following events. Suppose you set card tapping records. Then, whenever a card is applied, 5 snapshots before and 5 snapshots after the card is tapped are recorded in the CAM logs. The images are recorded in 1-second intervals and saved into a dedicated 1GB storage. When the storage is full, the oldest records will be deleted. The CAM logs are not deleted. 

CAM Log Creation

To create a CAM log, enter the CAM log name and select a notification.

• Code entered
  • A snapshot is taken whenever a code is entered via the keypad.
• Card tapped
  • A snapshot is taken whenever a card is applied even if the user is not authorised.
• Tamper switch activated
  • A snapshot is taken whenever the tamper switch is activated. Make sure that this is set in the 2N Helios IP configuration too. Refer to Intercom Configuration.
• Unauthorised door opening
  • A snapshot is taken whenever an unauthorised door opening is detected. Make sure that this is set in the 2N Helios IP configuration too. Refer to Intercom Configuration.
• User accepted
  • A snapshot is taken whenever the user authorises itself via Bluetooth.

Having entered the CAM log name and selected an event, click Create to get to the CAM log detail.

Here select the devices from which CAM logs shall be downloaded. In addition to passage data, the CAM logs display an intercom snapshot display icon. No CAM logs are displayed for the intercoms that are not equipped with a camera.

CAM Log Viewing

Click the icon to display a new window with intercom images.

Every image header includes [device][event] and [time] information. The images are arranged from the oldest to the latest one. You can download each snapshot separately.