Notification

The notification module helps you monitor selected device properties via e-mails.

Create a new notification:

  1. Complete the notification name.
  2. Select the notification type.

  3. Click on Create.

  4. A new page will be created for:
    1. notification activation,
    2. device adding for monitoring,
    3. user adding for e-mail sending,
    4. e-mail adding if non-existent in the system.

Note

 Make sure that SMTP is set correctly to make notifications work properly.

SMTP setting:

By default, SMTP is set to smtp.2nac.cz. We recommend you to use your own SMTP server for common use. Find the SMTP settings in the system settings.

 

  • SMTP switch – enable/disable SMTP
  • SMTP server address – enter your SMTP server address.
  • Port – port on which SMTP is active.
  • SSL switch – change the port number after SSL activation.
  • Default sender – add the e-mail sender's address.
  • User name – enter the SMTP server login name.
  • Password – enter the SMTP server login password.
  • Test e-mail – add the destination address for the test e-mail.
  • Send test e-mail – send the test e-mail to the address set above.
  • Set default value – set the SMTP default values.