AXIS A8004-VE – Direct calling to 2N® Indoor Talk

2N® Indoor Talk is able to receive calls from the AXIS door station A8004-VE. 

Requirements

  • 2N® Indoor Talk with firmware version 2.26.0 and later.
  • Tested with AXIS A8004-VE with firmware version 1.65.2.
  • IP address of AXIS A8004-VE: 10.0.14.54. IP address of 2N® Indoor Talk: 10.0.14.60. This is only an example, please change it according to your network requirements.

Configuration of 2N® Indoor Talk

  • Go to web management - Directory - Devices and add AXIS A8004-VE´s SIP address and unlock DTMF code to be able to call from 2N® Indoor Talk (by the green button) to AXIS A8004-VE.

 

Configuration of AXIS A8004-VE

  • Go to web management - VoIP - SIP Settings and enable SIP and incoming SIP calls.
  • Go to web management - Events - Recipients and add 2N® Indoor Talk´s SIP address as a new recipient.
  • Go to web management - Events - Action Rules and create a new Action Rule to call 2N® Indoor Talk by the call button.

  • Go to web management - Events - Action Rules and create a new Action Rule to answer incoming calls.
  • Go to web management - VoIP - DTMF Settings and add DTMF Sequence for unlocking the door by 2N® Indoor Talk.

  • Go to web management - Events - Action Rules and create a new Action Rule to open the door when DTMF sequence is received during call.