AXIS A8105-E – Peer-to-peer call to 2N® Indoor View
2N® Indoor View is able to receive calls from the AXIS door station A8105-E.
Important Information
- 2N® Indoor View with firmware version 2.29.0 and later.
- Tested with AXIS A8105-E with firmware version 1.65.3.2.
- IP address of AXIS A8105-E: 10.0.14.54. IP address of 2N® Indoor View: 10.0.14.62. This is only an example, please change it according to your network requirements.
Configuration of 2N® Indoor View
- Go to web management - Directory - Devices and add AXIS A8105-E´s SIP address and unlock DTMF code to be able to call from Indoor View to AXIS A8105-E.
Configuration of AXIS A8105-E
- Go to web interface- VoIP - SIP Settings and enable SIP and incoming SIP calls.
Go to web management - Events - Recipients and add 2N® Indoor View´s SIP address as a new recipient. - Go to web interface - Events - Action Rules and create a new Action Rule to call 2N® Indoor View by the call button.
- Name the rule and define the Condition and Action as on the picture below.
- Go to web interface - Events - Action Rules and create a new Action Rule to answer incoming calls.
- Name the rule and define the Condition and Action as on the picture below.
- Go to web management - VoIP - DTMF Settings and add DTMF Sequence for unlocking the door by 2N® Indoor View.
- Go to web management - Events - Action Rules and create a new Action Rule to open the door when DTMF sequence is received during call.
- Name the rule and define the Condition and Action as on the picture below.