AXIS A8105-E – Direct calling to 2N® Indoor Touch 2.0

2N® Indoor Touch 2.0 is able to receive calls from the AXIS door station A8105-E. However there are some limitations.

Limitations

  • It is not possible to make a call from the 2N® Indoor Touch 2.0 towards the AXIS Door Stations.
  • No video preview during the incoming call.
  • 2N® Indoor Touch 2.0 with firmware version 4.0.5. and later.
  • Tested with AXIS A8105-E with firmware version 1.65.3.2.
  • IP address of AXIS A8105-E: 10.0.14.50. IP address of 2N® Indoor Touch 2.0: 10.0.14.55. This is only an example, please change it according to your network requirements.

Configuration of 2N® Indoor Touch 2.0

  • Go to onscreen menu - Intercoms - Settings and disable SIP port randomisation feature

Configuration of AXIS A8105-E

  • Go to web management - VoIP - SIP Settings and enable SIP.

  • Go to web management - Events - Recipients and add 2N® Indoor Touch 2.0´s SIP address as a new recipient.
  • Go to web management - Events - Action Rules and create a new Action Rule to call 2N® Indoor Touch 2.0 by the call button.

  • Go to web management - VoIP - DTMF Settings and add DTMF Sequence for unlocking the door by 2N® Indoor Touch 2.0.

  • Go to web management - Events - Action Rules and create a new Action Rule to open the door when DTMF sequence is received during call.