Yealink VP-2009

2N IP Intercom Settings

Basic Settings / Phone book:

1. Position enabled - set Yes
2. Name - set the personal name for the selected telephone directory position. This parameter is optional and facilitates the telephone directory search.

3. Phone Number - IP address of the called party in the format sip:ip_address_yealink, e.g.: sip:10.0.27.254.

Yealink VP-2009

The terminal is ready for Direct Call after Reset to Factory Default (Upgrade menu, Reset to Factory button). When you are calling to 2N IP Intercom, you should call the 2N IP Intercom IP address.

Requirements for 2N IP Intercom Settings

For video, set RTP Payload type (1) to 0, RTP Payload type (2) to 99 or RTP Payload type (1) to 99, RTP Payload type (2) to 0 in the Advanced Settings / Video Codecs menu.

Requirements for Phone Settings

Requirements for 2N IP Intercom Settings

For video, set RTP Payload type (1) to 0, RTP Payload type (2) to 99 or RTP Payload type (1) to 99, RTP Payload type (2) to 0 in the Advanced Settings / Video Codecs menu.

Requirements for Phone Settings

 2N IP Intercom Settings

Basic Settings / Phone book:

1. Position enabled - set Yes
2. Position name - set the personal name for the selected telephone directory position. This parameter is optional and facilitates the telephone directory search.
3. Number 1 - IP address of the called party in the format sip:ip_address_yealink, e.g.: sip:192.168.1.3.

1. RTP payload type (1) - set 99.
2. RTP payload type (2) - set 0.
3. Polycom kompatibility mode - set Off.

The terminal is ready for Direct Call after Reset to Factory Default (Upgrade menu, Reset to Factory button). When you are calling to 2N IP Intercom, you should call the 2N IP Intercom IP address.