3.4 Intercom Control as Viewed by Internal User

Call answering

Incoming calls from 2N® IP Vario can be received like any other call. You can open the lock and activate or deactivate a user or profile during the call using your telephone numeric keypad. The call duration is limited to avoid unintentional 2N® IP Vario line blocking. Use the Call time limit parameter to set the maximum call duration (refer to the Intercom Configuration / Services / Phone / Calls subsection of Configuration Manual). To prolong a call push the # button on your telephone any time. A short beep 10 s before the call end signals an automatic all termination.

Calling to 2N® IP Vario

2N® IP Vario allows to answer an incoming call too. To set the required parameters use the Incoming calls item, refer to the Intercom Configuration / Services / Phone / Calls subsection of Configuration Manual.

Code Door Opening (Switch Activation)

2N® IP Vario is equipped with a door unlocking switch. To activate the switch enter the valid code (refer to the Intercom Configuration / Hardware / Switches subsection of Configuration Manual) on the numeric keypad.

Procedure:

  • Enter the lock 1 or lock 2 activating code using your telephone numeric keypad and push  (confirmation is unnecessary if the Lock code without confirmation option is selected, refer to the Intercom Configuration / Hardware / Switches / Advanced subsection of Configuration Manual).
  • A valid code is announced by acoustic signalling . An invalid code is announced by acoustic signalling.

Profile Activation and Deactivation

You can activate or deactivate a profile and define call routing to the telephone numbers assigned to the profile using the numeric keypad. For more details refer to the Intercom Configuration / Directory / Time Profiles subsection of Configuration Manual.

Procedure:

  • Enter the profile activation or deactivation code using the numeric keypad and push  for confirmation.
  • A valid code is announced by acoustic signalling  or  depending on the code type. An invalid code is announced by acoustic signalling .