5.5.5 Display


Some intercom models 2N LTE Verso can be equipped with a colour LCD display. The device state is displayed (call progress, door opening, etc.) and the following modes are available:

Display – enable the display and language settings for 2N LTE Verso. 

Slideshow – display a slideshow showing a set of recorded images after a defined idle time. The automatic switching time can be configured. 

Display 



  • Phone book displayed – enable/disable display of the phone book function.
  • Entry Keypad – enable the keypad/keypad type.
    • Disabled – disable the keypad.
    • Regular keypad – set the regular keypad type.
    • Scramble keypad – enable/disable keypad button scrambling (random button transposing) before every new display to prevent other persons from watching the code entered (Enhanced Security licence required).
  • Language – set the language for the texts to be displayed. Choose one of the predefined languages: English, Czech, German, Italian, French, Spanish, Russian, Finnish, Danish, Polish, Dutch, Portuguese, Turkish, Norwegian, Swedish, Thai, Hebrew or a custom language.
  • Prefer Icons to Text – the icons on the dosplay will be preferred to the text.
  • Power saving mode – activate the power saving mode in which the display brightness is reduced. If no event occurs during two Slideshow screen activation timeouts, the power saving mode activation has been successful. Set 0 in the Slideshow screen activation timeout to disable the power saving mode. Any movement in front of the intercom camera or any display event (such as door lock activation or display touch) restores the full brightness of the display.
  • Showcase Mode – set whether the device shall go into the showcase mode when idle. Choose various options in the showcase mode (Slideshow, Company Logo, Address).
  • Showcase Mode Delay – set the idle timeout in the range of 1 to 600 seconds after which the device goes into the Showcase Mode. There is always a fixed 15-second timeout for the device to return to the homescreen.



  • Original language – download the localisation file template for own translation. It is an XML file with all the texts to be displayed.
  • Custom language – remove, download and upload a localisation file of your own.


Note

If none of the pre-defined languages is convenient for you, proceed as follows:

  • Download the original language file (English).
  • Modify the file using a text editor (replace the English texts with your own ones).
  • Upload the modified localisation file to the intercom.
  • Set Language Settings | Language to Custom.
  • Check and correct if necessary the texts on the intercom display.

Slideshow

This tab helps you set the image and video list for the Slideshow mode. Up to 8 images and videos can be uploaded for the Slideshow to be switched with a predefined delay. 

  • Advance to Next Image After – set the image displaying time in a slideshow. 

Valid for 2N LTE Verso

Make sure that the image / video resolution is 214 x 214 or 214 x 320 pixels up to 2 MB. Other sizes will be adjusted to the display resolution automatically.

Click the magnifier icon   to view the loaded image, press  to delete an image and click  to hide a selected image/video on the device display. Click the variable image/video icon   to set a time profile   for the display. If no time profile is active, the slideshow will have no time profile conditioned content. In the same case, the slideshow will always have a content that is not conditioned by a time profile. If no image is loaded, the Slideshow mode will never be activated.

Tip

  • To hide the "Start with touch" display on the 2N LTE Verso model display, load an image of the resolution of 214 x 320 pixels.

Caution

  • Video with a 214 x 320 resolution cannot be uploaded in FW versions lower than 2.35.