2N®Lift1 is primarily designed for lift installation – especially where there is one lift and no communication is needed between the lift cabin, machine room, shaft bottom and shaft roof (2N® Lift8 is designed for more complex installations).
2N® Lift1 is a Speakerphone on principle. This means that a microphone and an in-built (behind the lift button panel) speaker are used for bidirectional communication.
2N® Lift1 can be connected to a PSTN line directly. 2N® Lift1 is also powered from the PSTN line - requires no battery and thus no maintenance. 2N® Lift1 can also be connected to a PBX line or a GSM gateway (refer to Associated Products).
2N® Lift1 can be used for making calls to pre-programmed numbers and cannot be misused for "calling at somebody else's account".
2N® Lift1 can be equipped with various extending modules as necessary during and after purchase.
