1.3 Changes

The manufacturer reserves the right to modify the product in order to improve its qualities.

Warning

  • Version 2.1.0 is not backward compatible with lower versions 2.0.x, which only support 9 user profiles.
  • Version 2.2.0 or higher is not backward compatible with version 2.1.0 or lower, which supports 16-digit phoner numbers.

Manual version

FW version

Description of changes

1.0


  • First product/manual version
  • Functional replacement of the 91364X series (2N Single Talk)

1.4.0
  • New value 0 = unfinished call (parameter 912)

1.6.2
  • Time until the next checking call is activated (parameter 810)
  • DTMF tone duration (parameter 903)
  • Ringing periods for checking calls (parameter 955)
1.6.41.6.4
  • Rescue process (parameters 966–968)
1.7.01.7.0
  • Rescue mode upgrade (parameter 967 change, 968 function change)
  • Low or error EG battery reporting (parameter 968)
  • ALARM button test (969)
1.7.01.7.0.7.3
  • New parameter 963
1.7.11.7.1
  • Operational call
2.0.02.0.0.0.7
  • New HW (both Universal and Compact)
  • New CPC Antenna/KONE, P100 2N Ext protocols
  • Button 2 function change (Short/long press)
  • New parameter 811 (Checking call manual setup)
  • New parameter 920 (Alarm button mode)
  • New parameter 970 (External gateway)
  • New parameter 987 (LED signalling according to EN81-28)
  • Parameter renumbering (971, 975, 976, 977 → 871, 875, 876, 877)
2.0.12.0.6.0.13
  • New parameter 890 (Reset)
  • New parameter 921 (Alarm button push signaling)
  • New parameter 925 (Button 2 mode)
  • Button 2 function change
  • Change of parameter 962 default value to 3000 ms (Minimum Alarm button pressing time)
2.0.22.0.9.0.17
  • Supported new CFG SMS with 2NEasyGate (services 811, 890, 996, 997, 998)
  • New parameter 900 (Addition of special characters to dial-in)
  • Reading serial numbers during calls via DTMF 9
2.1.02.1.0.0.1
  • Extension of user profiles to 1–19
2.2.02.2.0.0.1
  • 31-digit phone number support

Caution

  • The manufacturer keeps upgrading the software according to the customers' needs. Refer to www.2n.com for the latest PRODUCT software version and manual.
  • Refer to the Service Tool section for the 2N Lift1 firmware upgrade details.