1.3 Changes

The table below sums up the User Manual upgrade changes made so far.

Manual version

Description of changes

1.0.0

Firmware 1.0.0

  • Basic version
1.5.0

Firmware 1.5.0

  • VoIP parameters added
  • Internal splitter four-lift configuration option
    (up to four cabin units can be connected to one internal splitter with lift 1–4 identification)
1.6.0

Firmware 1.6.0

  • Fireman
  • I/O modules (inputs only)
  • Configurable rechargeable battery capacity
  • New alarm call protocols added (shaft/audio unit identification)
  • Dial-in option (for PSTN modules with non-standard tones)
  • CZ, EN, RU language support
  • Important warnings – Upgrade Server Database from ver. 1.5.x to ver. 1.6.x
  • Surveillance mode in the Control Panel
  • Improvements in applications
1.7.0

Firmware 1.7.0

  • Camera module
  • New protocols: CPC Antenna/KONE 2N ext. and P100 2N ext. (shaft number and audio unit type identification)
  • DE language support
  • Auto-delete of archive records
1.8.0

Firmware 1.8.0

  • Modified Groups menu in the Control Panel
  • PT language support
1.9.0

Firmware 1.9.0

  • RS232 module
  • SMS configuration
  • System completeness check
1.10.0

Firmware 1.10.0

  • Audio test of audio units
  • Service Tool for Android
  • TLS/SRTP support
  • MJPG player in Service Tool
  • Audio unit – Shaft Antivandal
  • Camera module web interface
2.1.0

Firmware 2.1.0

  • New processor type
  • Two-cabin lift extension (7 shaft/cabin audio unit location options)
  • Image downloading application (get-cam-image)
2.2.0

Firmware 2.2.0

  • Event reporting
  • New actions and script commands
  • Monitoring of statistic data and a new character set on the server

  • New installers

  • In-band DMTF

  • Direct call (call to IP address)

2.3.0

Firmware 2.3.0

  • Server – receiving of operational calls
  • Operational calls (jammed button, audio test error, battery error)
  • Get-cam-image – image loading option outside an active call
2.3.1

Firmware 2.3.1

  • Change of module mounting spacers
  • New events (service tool)
2.4.0

Firmware 2.4.0

  • LAN module
  • Diagnostic package
  • Button 2 behaviour change
  • Current device state and device monitoring (ControlPanel)
  • Port forwarding (Service Tool)
2.5.0

Firmware 2.5.0

  • CU restart via Service Tool
  • Current HW state monitoring (configure via the Service Tool or Control Panel – refer to Subs. 4.8 for details)
  • Audio unit audio test change
  • New parameter 029 (enable set 1 if set 2 is empty)
  • New parameter 987 (LED signalling according to EN81-28)
  • New parameter 810 (inter-checking call timeout)
  • New parameter 811 (manual checking call start)
  • New parameter 990 (allowed operational calls at events)
  • New parameter 963 (minimum button pressing time for forced/test alarm)
2.6.0

Firmware 2.6.0

  • New parameter 711 (Allowed 2G/3G bandwidths)
  • Change of parameter 983 range (1–100)
2.8.3 

Firmware 2.7.0

  • New parameter 919 (Machine room audio unit siren start)
2.8.5

Firmware 2.8.5

  • LTE/UMTS/GSM Module
  • Indication Elements of CU for LTE/VoIP modules