2.15 2N IP Phone D7A

Description

The 2N IP Phone D7A phone provides a two-way communication with the persons at the audio units. During evacuation, the phone is operated by a responsible and well-trained person, which communicates with the persons on the evacuation elevator floors via this IP phone. External IP cameras can be connected to the phone and show the previews on an integrated 7'' display.

Connection

1. Interconnect the IP phone and the Lift8 Central unit using an Ethernet cable.

2. Connect the power supply adapter (5V, 2A) to the DC5V slot on the phone back.

   Varování

   • Never combine a power source and PoE supply to avoid the device damage!
3. The IP phone will initialize automatically.
4. If there is a DHCP server in the network, the phone obtains the IP address automatically from the server.
5. If no DHCP server is present or active, set the static IP address on the phone as follows:
   • Go to the phone menu: Settings > Advanced settings (password protected) > Network > WAN port > IPv4.
   • Having set the IP address, subnet mask, default gateway and DNS server, press OK in the right-hand corner for confirmation.
6. Perform the other basic IP phone settings via the web configuration interface.