...
2N® Access Commander version 3.4 introduced a range of new features, detailed below. This subsequent 3.4.1 release adds support for 2N OS firmware 2.49, delivers minor text improvements, and resolves a few small issues.
| Varování |
|---|
| IMPORTANT - Due to a redesign of the proxy server settings, upgrading to this version |
...
| will erase any existing configuration—administrators will need to re-enter the proxy details after the update. |
New Features & Improvements:
...
This release supports 2N Fortis wireless electronic locks (handles and cylinders) in offline mode. Locks can be added to Access Commander and assigned to zones, similar to other access readers in the software. 2N Fortis locks adhere to the OSS Secure ID standard, where access rights are stored and encrypted on the card or fob (DESFire EV3) rather than the device itself. Due to the offline nature of these devices, active monitoring or control is not supported. In this version of Access Commander, a 2N intercom or 2N Access Unit is required for writing access rights to cards and must be part of the installation.
| Varování |
|---|
2N OS Firmware versions with the same or similar version numbers may not support 2N Fortis products (Electronic locks). All versions are listed in the official download section —
Installing the wrong version will work on 2N OS device, but 2N Fortis (Electronic locks) functionality will not be available. |
Proxy exceptions
2N Access Commander now supports more granular proxy configuration, allowing administrators to define proxy server exceptions (domains or addresses). This improvement simplifies network management in complex environments, ensuring external services can connect via network proxy while local devices can remain unaffected. This update addresses key customer requests and lays the foundation for future cloud-based functionality.
...
This release supports the new 2N IP Force 2.0 intercom the 2N Clip 2wire-IP answering unit, and of course, 2N Fortis electronic locks.
Additional Notes
| Varování |
|---|
| IMPORTANT - For security reasons, this version of Access Commander is not compatible with 2N Intercoms and 2N Access Units running firmware version 2.37 or older. Access Commander will not manage devices with these firmware versions even if compatibility mode is enabled. Please ensure all devices are running firmware version 2.38 or newer before upgrading. |
Required Device Firmware Versions for Full Feature Support
...