2N® Indoor View signals variable operational statuses with a sequence of tones. If the standard signaling tones do not meet your requirements, you can modify them.

The device allows you to modify sound signaling for the following states:

    1. Ringtone before call pickup
    2. Ringing tone
    3. Busy tone
    4. Call end signaling
    5. Doorbell


Sound Mapping

  • Ringing before Call Pickup – set the ringtone to be played before an incoming call is picked up (device ringtone).
  • Ringback Tone – set the sound to be played when the called user is ringing. The PBX ringtone is preferred to the user ringtone in the device.
  • Call Busy Tone – set the tone to be played when the called user is busy. 
  • Call Hang-Up Signaling – set the tone to signal the call end.
  • Doorbell – set the tone to be played when the doorbell is used.


Sound Upload

You can upload up to 10 user sound files to the device and name each of them for better orientation. 

Press to upload a sound file to the device. Select a file from your PC and click Upload. Press to remove a file. Click to play a successfully uploaded sound file (locally on your PC). Press to record a sound file via your PC microphone. 

  • Žádné štítky