 |
2N® Indoor View is equipped with a real time clock to back up the device for even a few days in case of power outage. Click Synchronise to synchronise your 2N® Indoor View time with your PC time value any time.
Time in 2N® Indoor View can be synchronised with any available SNTP server.
Note
- A correct date/time value is unnecessary for the basic function of 2N® Indoor View but crucial for a proper function of time profiles and correct event times in variable lists (Syslog, Entered cards, Logs downloaded via HTTP API, etc.).
In standard operational conditions, the 2N® Indoor View real time circuit accuracy is ±0.005 %, which may represent an error of up to ±2 minutes per month.
List of Parameters
 |
- Synchronize with browser – click the button to synchronize the device time with your current PC time value.
 |
- Automatic Detection – define whether the time zone shall be detected automatically from My2N. In case automatic detection is disabled, the Manual selection parameter is Used (manually selected time zone or Own rule).
- Detected Time Zone – display the automatically found time zone. In case the function is unavailable or disabled, N/A is displayed.
- Manual Selection – set the installation site time zone. Set the time shift and summer/winter time transitions.
- Custom Rule – if the device is installed on a site that it not included in the Time Zone parameter, set the time zone rule manually. The rule is applied only if the Time Zone parameter is set to Manual.
 |
- Use NTP Server – enable the use of the NTP server for internal time Synchronization.
- NTP Server Address – set the IP address/domain name of the NTP server used for the device internal time synchronization.
- NTP Time Status – display the state of the last local time synchronization attempt via NTP: Unsynchronized. Synchronized, Error.