2.2 Before You Start

Installation Conditions

  • Install the  2N® SmartCom PRO antennas with respect to the signal quality in the location. Where the signal is poor, use a higher gain antenna (not included in the delivery).
  • No strong electromagnetic radiance is allowed on the installation site.
  • Refer to the Technical Parameters for the allowed range of working temperatures.
  • 2N® SmartCom PRO may not be operated on sites exposed to direct sunshine or in the vicinity of heat sources.
  • 2N® SmartCom PRO is designed for indoor use. Never expose it to rain, running water, condensation moisture, mist, etc.
  • 2N® SmartCom PRO may not be exposed to aggressive gases, acid vapours, solvents and similar chemicals.

Tip

  • Order an IP65 Installation Box with a DIN rail, grounding terminals and bushings if you need to install 2N® SmartCom PRO in such adverse conditions.

Caution

  • Make sure that you have the necessary technical equipment – SIM with GPRS/UMTS/LTE support - and that the PIN request is disabled on the SIM or the PIN is identical with the PIN set in the 2N® SmartCom PRO configuration.

Caution

  • This product, its installation and configuration are not intended for persons with physical, sensory or mental disabilities or persons with limited experience and skills unless expert supervision or relevant instructions are provided to them by a person responsible for their safety.