2.3 Mounting

External Antenna Connection

Screw the antenna cable into the SMA antenna connector.

Caution

  • Tighten the antenna connector gently with your hand – never use wrenches!

Note

  • For the best signal level fix the antenna in vertical position.
  • Use signal strength indicator to find best place for antena.

SIM Card Installation

Slot for SIM card is placed on the connector panel. Insert the SIM card to the slot with contacts oriented to the front panel. Make sure that the card is locked properly.

Cautions

  • Make sure that the UMTS/GSM provider's SIM card is compatible with the UMTS/GSM network supported by your 2N® SmartGate UMTS version.
  • Select the required UMTS/GSM provider and SIM card services, such as call forwarding, call barring, preferred networks, SMS service centre, etc. in your mobile phone before inserting your SIM card in 2N® SmartGate UMTS.

Power Supply Connection

2N® SmartGate UMTS is fed with 10-16V DC. Where a source other than the included power supply adapter is used, the voltage range and polarity have to be maintained. See technical parameters.

2N® SmartGate UMTS with battery option allows to support functionality in case of power failure. For backup use four pieces of accumulators NiMh size AA. These accumulators are not part of delivery. Put the accumulators to the battery holder on the bottom side under the cover prior to installation. Polarity of accumulators is marked inside of the battery space.

Warning

  • Do not activate the power supply until the antenna is connected to 2N® SmartGate UMTS to avoid the UMTS/GSM module damage.
  • For backup use only suggested type of accumulators NiMh size AA. Only this type of storage batteries is permitted for use!.When another type of batteries is used, there is a danger of damage of device or even explosion!
  • The battery should never be placed in municipal waste. Please check local regulations for disposal of batteries.