2.2 Before You Start

Product Completeness Check

Check the product for completeness before installation please:

  • 1× 2N® SmartGate UMTS
  • 1× Magnetic Antenna with coax cable
  • 1× Supply adapter
  • 2× Telephone Cable
  • 1× PC-connection USB cable
  • 1× SMS sending input connector
  • 2× Dowel
  • 2× Screw

  • 1× CD-ROM with User Manual and software 1)

  • 1× Quick Installation Guide

Note

1) Enclosed software: 

  • 2N® SmartGate PCManager
  • 2N® SmartGate SMS gateway for easy SMS sending and receiving
  • 2N® SmartGate UMTS Driver for PC
  • User Manual in PDF format

Installation requirements

  • 2N® SmartGate UMTS is designed for vertical mounting on suspension holes (use the mounting pattern). This position is the best for signal reception because a vertical antenna is used. 2N® SmartGate UMTS can be operated in the horizontal position too where the UMTS/GSM signal is good.
  • Install 2N® SmartGate UMTS with respect to the UMTS/GSM signal strength – check the signal strength using the PCManager.
  • No strong electromagnetic radiance is allowed on the installation site.
  • For the allowed range of operating temperatures refer to the "Technical Parameters".
  • 2N® SmartGate UMTS can disturb other telecommunication systems. Place phone lines and connected terminals and PBX's faraway from antenna.
  • It is impossible to operate 2N® SmartGate UMTS on sites exposed to direct solar radiation or near heat sources.
  • 2N® SmartGate UMTS is designed for indoor use. It may not be exposed to rain, flowing water, condensed moisture, fog, etc.
  • 2N® SmartGate UMTS may not be exposed to aggressive gas, acid vapours, solvents, etc.
  • 2N® SmartGate UMTS is not designed for environments with high vibrations such as means of transport, machine rooms, etc

Caution

  • Check that you have everything needed for 2N® SmartGate UMTS start-up (SIM card, analogue phone set or FXO port of PBX, eventually PC etc.)