3.2 Default Reset
The following factory default parameters are available:
Factory Default Reset
In some cases, it may be useful to reset the 2N® SIP Speaker, Wall Mounted factory default values using the RESET switch on the back panel. Do so, for example, if
2N® SIP Speaker, Wall Mounted ceases to respond due to, for example, incorrect LAN settings, LAN configuration changes, forgotten password and so on.
Factory Default Reset with Static IP Address
Move the switch to the position RESET. Do not disconnect the device from the power supply while resetting.
Reset with Static IP Address
- Wait until you can hear a beep (for approx. 18 s).
- Now move the RESET switch to the opposite position.