3.2.3.3 HTTP Command


HTTP Command on the 2N® Indoor Talk answering unit helps you send a selected HTTP command by a long press of the lock button in the device relax state. If the function is disabled or no IP address is completed, a long press of the lock button at relax has no function. The lock button keeps flashing while the command is being processed and cannot be used for another HTTP command sending or unlocking during this time. The function is disabled by default.

  • URL – set the HTTP command to be sent to an external device by pressing a button. The command is sent via the HTTP (GET request). The command format is http://ip_address/path. E.g. http://192.168.1.50/relay1=on. If the parameter is empty, the command is not sent.
  • Name – set the HTTP command name.
  • Username – set the user name for authentication of the HTTP command to be sent by pressing a button. The parameter is mandatory only if the requested device requires authentication.
  • Password – set the password for authentication of the HTTP command to be sent by pressing a button. The parameter is mandatory only if the requested device requires authentication.

Caution

  • A long press of the lock button 30 s after the device restart does not send an HTTP command but reads the device IP address.