3.2.5.5 Auto Provisioning




My2N 

The My2N cloud platform is used for remote administration and configuration of the 2N IP devices and helps you remotely connect to the device web interface.

  • My2N Enabled – enable connection to My2N.



  • Serial Number – display the serial number of the device to which the valid My2N code applies.
  • My2N Security Code – device code for adding to My2N. 
  • Generate New – the active My2N Security Code will be invalidated and a new one will be generated.

It displays information on the state of the device connection to My2N.

  • My2N ID – unique identifier of the company created via the My2N portal.

TR069

Use this tab to enable and configure remote device management via the TR-069 protocol. TR-069 helps you reliably configure the device parameters, update and back up configuration and/or upgrade device firmware.

The TR-069 protocol is utilized by the My2N cloud service. Make sure that TR-069 is enabled and Active profile set to My2N to make the device work with My2N properly. Only then the device will be able to log in to My2N periodically for configuration.

This function helps you connect the device to your ACS (Auto Configuration Server). In this case, the connection to My2N will be disabled in the device.

  • My2N / TR069 Enabled – enable connection to My2N or another ACS server. 


  • Active Profile – select one of the pre-defined profiles (ACS), or choose a setting of your own and configure the ACS connection manually.
  • Next Synchronization in – display the time period in which the device shall contact a remote ACS.
  • Connection Status – display the current ACS connection state or error state description if necessary.
  • Communication Status Detail – server communication error code or HTTP status code.
  • Connection test – test the TR069 connection according to the set profile, see the Active profile. The test result is displayed in the Connection status.